Jeppesen JeppView 3 - Manual (Page 112)

Using the Enroute Chart
115
• Use the mouse wheel (if available). You can access a setting for the mouse
wheel by clicking Tools > Options. In the Display tab, clear the Mouse
wheel zoom check box.
Zooming the Chart
To zoom in and out on the enroute chart, do any of the following:
• Right-click the enroute chart and choose any of the following:
o
Zoom In
o
Zoom Out
o
Full Zoom Out
• Click the Zoom In or Zoom Out button on the Chart toolbar.
• Press the PLUS (+) or MINUS (-) KEY.
• Use the mouse wheel (if available). You can access a setting for the mouse
wheel by clicking Tools > Options. In the Display tab, select the Mouse
wheel zoom check box.
• Click the Chart menu and choose any of the following:
o
Zoom In
o
Zoom Out
o
Full Zoom Out — The Full Zoom Out feature zooms out to a
worldwide view.
o
Draw a zoom box (to zoom in only; see instructions below).
Drag Zoom
To radically change locations on the chart,
you might find it easier to use the Full Zoom
Out feature, which displays the entire world in
the Enroute Charts View, and then draw a
zoom box to zoom in on your desired location.
To use the drag zoom feature:To use the drag
zoom feature:
1. Point to the upper left corner of the
area on the enroute chart on which
you want to zoom.
2. Press and hold the mouse button and
drag the pointer down and to the right
to draw a box on the screen. The
dimensions of the zoomed-in area
appear on the sides of the zoom box
until you release the mouse button.
3. Release the mouse button when the
zoom box represents your selected area. The smaller the box you draw, the
closer you zoom in on the chart.