Comtrol AT Commands for SmartACFL - Manual (Page 117)

Command Reference Manual
100722A Conexant 4-11
Syntax
+FDD=<value>
Defined Values
<value> Decimal number corresponding to the selected option. For modem decode of <DLE><SUB>, the
defined range are:
0 <DLE> <DLE> or discard (default and only)
1 <DLE> <DLE> (not supported)
For modem encoding of <1/0> <1/0>the defined values are:
0 <DLE> <DLE> <DLE> <DLE> (default and only)
1 <DLE> <SUB> (not supported)
Reporting Current or Selected Values
Command: +FDD?
Response:
+FDD: <value>
Example: +FDD: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +FDD=?
Response:
+FDD: (<value> range)
Example: +FDD: (0)