Comtrol AT Commands for SmartACFL - Manual (Page 120)

Command Reference Manual
4-14 Conexant 100722A
4.2.3.8 +FMR? - Request Revision Identification
This command causes the modem to transmit one or more lines of information text identifying the modem version, revision
level or date.
Syntax
+FMR?
Typical Response
V3.001-V90_2M_DLS
OK
4.2.3.9 +FLO - Flow Control
This parameter allows the DTE to identify and select the type of flow control used.
Syntax
+FLO=<method>
Defined Values
<method> Decimal number corresponding to the selected option.
0 XON/XOFF and RTS/CTS flow control turned off.
1 Use XON/XOFF flow control in either direction.
2 Use RTS for flow control of the modem by the DTE; use CTS for flow control of the
DTE by the modem.
Reporting Current or Selected Values
Command: +FLO?
Response:
+FLO: <method>
Example: +FLO: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +FLO=?
Response:
+FLO: (<method>range)
Example: +FLO: (0-2)
Result Codes
OK <method> = 0-2.
ERROR Otherwise.
4.3 EXAMPLES
Examples of calling (transmitting) and answering (receiving) one page using fax class 1 commands are shown in Table 4-4
and Table 4-5, respectively. The examples show the interchange between the DTE and the modem for various cases.
Comments are included to explain how to handle various situations. Commands and responses are in upper case (e.g.,
AT+FRH=3) and comments are in lower case. All streams of data denoted by <..frame> are terminated by the <DLE><ETX>
characters.