Comtrol AT Commands for SmartACFL - Manual (Page 22)

Command Reference Manual
3-2 Conexant 100722A
3.2.1.2 +FCLASS - Select Active Service Class
This command selects the active service class (mode).
Syntax
+FCLASS=<mode>
Defined Values
<mode> Decimal number which corresponds to the selected service class.
0 Select Data Mode (see Section 1). (Default.)
1 Select Facsimile Class 1 Mode. (See Section 3.)
1.0 Select Facsimile Class 1.0 Mode. (See Section 3.)
2 Select Facsimile Class 2 Mode. (See Section 1.)
8 Select Voice Mode. (See Section 5.)
10 Select DataDome. (Fax for Japan.)
Result Codes
OK For <mode> = 0, 1, 1.0, 2, 8, and 10.
ERROR Otherwise.
Reporting Current or Selected Values
Command: +FCLASS?
Response:
+FCLASS: <mode>
Example: +FCLASS: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +FCLASS=?
Response:
+FCLASS: (<mode> range)
Example: +FCLASS: (0,1,1.0,2,8,10)
3.2.1.3 +VCID - Caller ID (CID)
This command controls the reporting and presentation of data associated with the Caller ID services in the Incoming Call Line
ID (ICLID) data format for the next call.
Syntax
+VCID=<pmode>
Defined Values
<pmode> Decimal number corresponding to the selected option.
0 Disable Caller ID reporting. (Default.)
1 Enables Caller ID with formatted presentation to the DTE. The modem presents
the data items in a <Tag><Value> pair format. The expected pairs are date, time,
name, and caller code (telephone number),
2 Enables Caller ID with unformatted presentation to the DTE.
Reporting Current or Selected Values
Command: +VCID?
Response:
+VCID: <pmode>
Example: +VCID: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VCID=?
Response:
+VCID: (<pmode> range)
Example: +VCID: (0-2)