Comtrol AT Commands for SmartACFL - Manual (Page 63)

Command Reference Manual
100722A Conexant 3-43
Reporting Supported Range of Parameter Values
Command: +EB=?
Response:
+EB: (<break_selection> range),(<timed> range), (default_length> range)
Example: +EB: (0),(0),(0)
3.2.5.3 +ESR - Selective Repeat
This extended-format numeric parameter controls the use of the selective repeat (SREJ) option in V.42.
Syntax
+ESR=[<value>] Decimal number 0 specifying that SREJ is not used.
Reporting Current or Selected Values:
Command: +ESR?
Response:
+ESR: <value>
Example: +ESR: 0 For default setting
Reporting Supported Range of Parameter Values:
Command: +ESR=?
Response:
+ESR: (<value>)
Example: +ESR: (0)
3.2.5.4 +EFCS - 32-bit Frame Check Sequence
This extended-format numeric parameter controls the use of the 16-bit or 32-bit frame check sequence (FCS) option in V.42.
Syntax
+EFCS=[<value>]
Defined Values
<value> Decimal number 0 specifying the use of the 16-bit FCS specified in V.42.
Reporting Current or Selected Values
Command: +EFCS?
Response:
+EFCS: <value>
Example: +EFCS: 0 For default setting.
Reporting Supported Range of Parameter Values
Command: +EFCS=?
Response:
+EFCS: (<value> range)
Example: +EFCS: (0)