Conexant – Comtrol AT Commands for SmartACFL User Manual
Page 147
Command Reference Manual
100722A
Conexant
6-3
6.1.2
<DLE> Shielded Codes Sent to the Modem (DCE)
Table 6-3 lists the supported <DLE> shielded codes sent to the modem in the expression <DLE><code>. The number in
parenthesis in the second column corresponds to the T.50 equivalent.
Table 6-3. Supported <DLE> Shielded Codes Sent to the Modem (DCE)
Code
Code
Simple Action Command Description
<DLE>
(1/0)
Two contiguous <DLE><DLE> codes indicate a single <DLE> in the data stream
("Immediate Command" or "Stream Command").
u
(7/5)
[Action Numbers 0 and 3] Increase the volume or gain by one unit ("Immediate
Command").
d
(6/4)
[Action Numbers 1 and 4] Decrease the volume or gain by one unit ("Immediate
Command").
p
(7/0)
[Action Number 9] Pause.
r
(7/2)
[Action Number 10] Resume.
<ETX>
(0/3)
[Action Number 11] End Voice Transmit State ("Stream Command").
<CAN>
(1/8)
[Action Number 12] Clear transmit buffer of voice data ("Immediate Command").
!
(2/1)
[Action Number 15] Receive abort ("Immediate Command").