Comtrol AT Commands for SmartACFL - Manual (Page 12)

Command Reference Manual
1-2 Conexant 100722A
1.1.4 ConfigurACE II for Windows Utility Program
The PC-based ConfigurACE II for Windows utility program allows the OEM to customize SmartACF and SmartACFL modem
firmware to suit specific application and country requirements. ConfigurACE II for Windows allows programming of functions
such as:
• Loading of multiple sets of country parameters
• Loading of NVRAM factory profiles
• Call progress and blacklisting parameters
• Entry of S parameter maximum/minimum/default values
• Limitation of transmit levels
• Modification of factory default values
• Customization of the ATI4 response
• Customization of fax OEM messages
• Enabling of Telephony Extension features
• Direct
Mode
This program modifies the hex object code which can be programmed directly into the system Flash ROM. Lists of the
generated parameters can be displayed or printed.
Conexant-provided country parameter files allow a complete set of country-specific call progress and blacklisting parameters
to be selected.
Refer to the ConfigurACE II for Windows software for a detailed description of capabilities and the operating procedure.
1.2 REFERENCE DOCUMENTATION
Document Title Document No.
SmartSCM Modem, V.90/K56flex/V.34/V.32bis CX88168 Single Chip Modem with CX20463
SmartDAA and Optional CX20437 Voice Codec for Embedded Applications Designer's Guide 100491
SmartACF Modem, V.90/K56flex/V.34/V.32bis Modem Device Set with CX02200 Modem
Controller and DSP, CX20463 SmartDAA and Optional CX20437 Voice Codec Designer's Guide 100498
SmartACFL Modem, V.90/K56flex /V.34/V.32bis Modem Device Set with L2702 Microcontroller,
P9373 Modem Data Pump, CX20463 SmartDAA , and Optional CX20437 Voice Codec for Low
Power Applications Designer's Guide
100444