Keri Systems Doors.NET Manual - Manual (Page 130)

Doors.NET Reference Manual
- 130 -
If you want to print cards to a sheet printer from your application, you will need to set
parameters such as page margins, number of cards per page, and duplex printing using
the options described in the following section. You can also use the following options to
create a report that can be printed from your application to a document printer. To modify
the printer settings (from the default printer driver settings) such as paper size or ori-
entation, follow these steps:
1. On the File menu, click Page Setup. The Page Setup dialog box appears with the
Page Setup tab showing.
2. Click Properties. The Properties dialog from your printer’s driver appears. If avail-
able, set the options that you want to modify.
3. Click OK to save the settings.
Printing Reports
To create a multi-card output (for example, a report or for sheet-printing), follow these
steps:
1. On the File menu, click Page Setup. The Page Setup dialog appears.
2. Indicate the number of cards to be printed across the page in the Cards Across
field.
Note: A landscape page allows for more cards to be printed across than a portrait
page, but you will not be able to print as many cards down.
3. Indicate the number of cards to be printed down the page in the Cards Down field.
Note: A portrait page allows for more cards to be printed down than a landscape
page, although you will not be able to print as many cards across.
4. Adjust the horizontal and/or vertical spacing between the cards printed on the page
should you so desire.
5. Enter the new page margins in the fields as required.
Note: The default is "0" which allows the card printer to print edge-to-edge on the
card media. If printing to a document printer, you may need to adjust these mar-
gins manually if this doesn't occur automatically.
Headers and Footers