Keri Systems Doors.NET Manual - Manual (Page 532)

Doors.NET Reference Manual
- 532 -
4. You can use any available input on the controller, or a 4x4 or GIOX module con-
nected to any of the controller's busses. By available, this means any output (con-
trol point which has not already been assigned for a specific purpose, such as a
door strike or door alarm output.
5. As previously mentioned, procedures can have multiple actions assigned to them,
so you may want to activate multiple outputs. If so, select the procedure name
again, click the 'Add Action' button again then choose another output and repeat
the same steps detailed above.