Keri Systems Doors.NET Manual - Manual (Page 579)

Doors.NET Reference Manual
- 579 -
Reports - Hardware
Hardware Reports allow you to run a report on the properties and configuration of all the
hardware on the system. This includes: Controllers, Device Types, Doors, Inputs, Mag-
stripe Library, Network Camera, Outputs, Panels and the Wiegand Library.
1. To run Hardware Configuration Reports click Reports - Hardware.
2. Select one of the Report Types from the drop-down list, for example, Controller.
Basic controller information will be displayed immediately in the grid for all con-
trollers in the system.
3. Use the Field Chooser to select and deselect which columns you wish to see dis-
played in the properties grid.
4. From the Field Chooser window place a tick against the properties you wish to see
displayed. Uncheck those you do not wish to see.