Controller properties – Keri Systems Doors.NET Manual User Manual

Page 338

Advertising
background image

Doors.NET Reference Manual

- 338 -

Note: There are a wide variety of settings and not all controller types have the same
available settings.

Controller Properties

Misc

l

Communications

- shows the communication status for the controller

l

Gateway ID

- the Global Unique Identifier (GUI) of the gateway that the controller is

assigned to.

l

SPMID

- the Global Unique Identifier (GUID) of this controller

l

SPM_Number

- the numeric reference number for this controller

l

Number of Access Levels

- maximum number of access levels supported

l

Number of Schedules

- maximum number of supported schedules

l

Number of Holidays

- maximum number of holidays supported

l

Number of Panels

- maximum number of Panels that can be connected to this con-

troller

l

Number of Readers

- maximum number of readers supported with this controller

l

Number of Monitor Points

- maximum number of monitor points supported

l

Number of Control Points

- maximum number of control points supported

General

l

Description

- enter a descriptive name for this panel (128 characters max)

l

Enabled

- enables or disables communication to this controller

l

Controller Function

- enables a normal controller to be changed between an elev-

ator controller and a normal controller

l

Controller Type

- lists the controller model

l

Connection Control

- Determines the mode of the communication at startup to this

controller

l

Use Master Settings

- configures the controller to use the Master schedules, hol-

idays and card formats - all controllers that support this setting have it set to Yes by
default

l

Use Controller Holidays

- configures the controller to use its own Holidays. This

overrides the Master Settings

l

MAC Address

- the MAC address for this controller

Communication Settings

l

Communication Channel

- the communication channel assigned to this controller

(either Serial, Network (Ethernet), or Modem).

l

IP Address

- the IP address assigned to the controller

l

Port Number

- the IP port number for this controller

l

Password Required

- enables password verification on each communication ses-

sion with this controller

l

Password

- the password to be used at the start of each communication attempt

Advertising