Keri Systems Doors.NET Manual User Manual
Page 150
Doors.NET Reference Manual
- 150 -
5. Click on the Readers tab. On the right you will see a list of all the readers on the
system.
6. Generally, most of the readers located inside a building would be added to the 'In'
reader list.
Note: Any reader that is NOT added to the 'In' reader list will automatically be des-
ignated as an 'Out' reader. However if the physical building just has one entry and one
exit reader, then just addthe entry reader by right-clicking it and selecting 'Add to In Read-
ers'. Multiple 'In' readers can be selected by using the 'Ctrl' key.
7. The reader will immediately appear in the 'In' Readers reader list
8. Close the Manage Areas window and return to the main window.
9. From the main Roll Call window select the newly created area from the Current
Selection drop-down list.
10. The active area grid will be populated with cardholders as they badge into the
selected area. The occupancy count (highlighted below) will increase every time a
new cardholder enters the area.