Keri Systems Doors.NET Manual - Manual (Page 132)

Doors.NET Reference Manual
- 132 -
Note: This option is used for single card printing or batch printing.
When you choose the Print command, you will have the following options:
l
Front Side Only -Prints only the front layout of the card.
l
Back Side Only -Prints only the back layout of the card.
l
Front and Back -Prints both the front and back layouts of the card. This selection
should be used if you have a specialized printer that prints on both the front and
the back of cards, or if you want to manually flip the cards over to print on their
backs.
Note: If you want to manually flip cards over to print on their backs -- especially if you are
printing both sides of the cards in batches -- you should know that this method will
require a moderate amount of trial and error before you achieve satisfactory results.
Duplex Settings
Use these settings to print layouts on both sides of the printer media or to print both sides
of the layout on one side of the media. These options are saved to the layout file (DGN)
and used to create reports or for sheet printing on a larger format printer.
Note: This does not affect the way your card layouts will print to a card printer.