Keri Systems Doors.NET Manual - Manual (Page 247)

Doors.NET Reference Manual
- 247 -
3. Click the Setup tab then click Hardware Setup.
4. Click the All tab and the PXL gateway appears at the top of the hardware tree.
5. Highlight the PXL gateway to view its properties in the grid.
6. With the gateway highlighted, click the Add PXL icon and the controller is added to
the hardware tree beneath the gateway, as shown.
Configure the Communication Channel
If you are upgrading from Doors32 and your existing installation uses sites mode, Door-
s.NET accepts multiple master controllers allowing you to continue to maintain the sites
mode style organization. Each site’s master controller will require its own com-
munication channel.
There are three different communication channels available, one of which must be
assigned to the master PXL controller for establishing communication to the PXL net-
work. All slave controllers are added to the software using Auto-configuration.
You can communicate to a PXL using Doors.NET via: