Keri Systems Doors.NET Manual - Manual (Page 463)

Doors.NET Reference Manual
- 463 -
Assign Global Lock/Unlock Hardware
Assigning hardware allows you to assign/unassign readers individually to the Global
Lock and Global Unlock functions and assign Inputs as trigger points.
NOTE: Hardware configuration options become read-only if the system is in an active
Global Lock or Global Unlock state. This prevents a configuration change from being
made that may affect or confuse the current Global Lock/Unlock state. This read-only
state does not apply to other properties or configuration options for other features within
the program.
1. Click the Setup tab > Hardware Setup ribbon icon to perform hardware con-
figuration.
Enabling Global Lock/Unlock in PXL Controllers
For each PXL controller using Global Lock/Unlock, you must first enable the Global Lock-
/Unlock option. For each PXL controller in the hardware tree:
1. Locate the Options > Use System Global Lock/Unlock pull-down menu.
2. Set this option to True for each controller participating in Global Lock/Unlock com-
mands.