Keri Systems Doors.NET Manual - Manual (Page 299)

Doors.NET Reference Manual
- 299 -
Date as 365 days from enrollment. The Total Access template selection auto-
matically sets Total Access access rights to the cardholder(s).
l
Number of Records - enter the number of credentials to be enrolled.
3. Enter Credential information:
l
Add Credentials Check-Box - Click the check-box to assign credentials to each
enrollment entry.
l
Starting Cardnumber - enter the starting card number. Block Enrollment cre-
dentials are entered in sequential, numeric order.
l
Status - select the Status to apply to all credentials.
l
Calculate Internal Number Check-Box - Click the check-box to have Doors.NET
automatically calculate the credential's Internal Number as part of the enrollment
process.
l
Credential Type - select the credential type: Keri NXT, Keri MS, or 26-bit Wie-
gand.
l
Facility Code - enter the facility code.
4. Click Start.
5. Verify the entered information is correct.
6. Click OK to perform the Block Enrollment or click Cancel to correct an entry.
7. The bottom of the Block Enrollment window displays a green progress bar.
8. Click the X-box to close window once enrollment is complete. The Block Enroll-
ment entries now appear in the Doors.NET cardholder list.