Keri Systems Doors.NET Manual - Manual (Page 60)

Doors.NET Reference Manual
- 60 -
Software Installation
Doors.NET installation and controller configuration is a three step process. Each of
these steps has its own section, with controller configuration broken into separate doc-
uments per hardware type.
1. Install the software (see below), which will also automatically install Microsoft's
SQL Server Express ® (a free SQL server program) if the PC does not already
have SQL available.
2. Activate the License and register your software using the License Manager utility.
3. Configure the Gateway using the Gateway Wizard utility.
Installing the Software
Doors.NET software installation can be done either via DVD or online via the WebIn-
staller.
Installation via DVD is the quickest way as all necessary installation files are on the
DVD.
Via WebInstaller
If you do not have a Doors.NET DVD the WebInstaller links directly to an online version
of the installation program. This is a slower process as files are downloaded from the
Keri web server on an as-needed basis. Contact your Inside Sales Representative to be
given access to the download link. Download and run the WebInstaller program to start
the Software Installation. Any supporting files required to complete the installation are
downloaded via the Internet from the Keri web site, hence, installation via WebInstaller is
a much more time consuming process than installation via DVD as this process is based
on your Internet connection speed and reliability. A high-speed Internet connection is
recommended when using the WebInstaller.
Via Doors.NET Installation DVD
1. Insert the Doors.NET Software Installation DVD and the AutoRun program begins.