Keri Systems Doors.NET Manual - Manual (Page 440)

Doors.NET Reference Manual
- 440 -
1. To configure the access groups for a specific user group, select the user group and
click on the Access Groups tab. The entire list of all access groups is displayed.
2. A check mark indicates that the selected access group will be available to the
selected user group.
3. Click save.
Adding Routing
In addition to controlling which hardware items are available through Location assign-
ment, and the search limits imposed by the access group assignment, the user group
can also be assigned one or more routes. A route is part of the event message noti-
fication and only user groups that have a route assigned can receive messages from the
hardware which also has the same routes assigned. This allows the system admin-
istrator to configure a user login that receives messages from just a selection of hard-
ware (i.e from certain readers perhaps.