Keri Systems Doors.NET Manual - Manual (Page 400)

Doors.NET Reference Manual
- 400 -
21. All the configured Elevator Outputs, including those on the controller should activ-
ate.
Create the Access Groups
1. Next is to create the access groups; identifying to which floors the cardholders will
be allowed access. This Application Note will describe the process for creating an
Elevator Group for Floors 1 to 8 following the Always time schedule.
2. Click the Home tab and then click Elevator Groups.
3. Click the Add icon on the ribbon.
4. Change the description to something appropriate to your site.
5. Highlight the new group. Then from the Floors list in the properties section, high-
light the floors you wish to add. Click on the first floor and then drag the mouse
down to the last selection, or select the first, press the shift key, and then select the
last.
6. Highlight a time schedule. The example below shows Always selected (to allow
24/7 operation). When all three elements making up the access group are high-
lighted the Assign button on the ribbon becomes active.
7. Click assign to create the elevator access group.