Keri Systems Doors.NET Manual - Manual (Page 37)

Doors.NET Reference Manual
- 37 -
l
Corrected an issue when reassigning a door strike from a controller to a 4x4 I/O
module. The reader assignment list was not being filled with all the available read-
ers.
l
Corrected an issue in actively updating Access Group information between clients
when multiple clients are open. The client saving an Access Group change would
correctly display the new Access Group name; remote clients would display "New
Group" until the remote clients were closed and then re-opened. Now all clients dis-
play the new Access Group name whenever changes are saved, regardless of cli-
ent.
l
Improved Temporary Card date resolution by including hours, minutes, seconds to
the date selection. In certain applications, a Temporary Card set for one day
access would expire immediately after being issued. The full date/time stamp
ensures one day Temporary Cards operate correctly.
l
Corrected an issue where the online help file would not open when an operator
pressed F1 in certain software installations. When certain options were selected,
the online help viewer program was not properly being registered during the install-
ation process. The installer has been changed to ensure proper help viewer regis-
tration regardless of software installation options.
l
Added several new options to the default list of entries for the Emergency Contacts
screen.
l
Corrected several refresh issues with data entries in the cardholder grid not being
displayed until the cardholder grid was closed and then re-opened.
l
Added a check that will not allow an Access Group to be deleted if there are still
Readers assigned to that group. This allows an Operator an opportunity to ensure
that Access Group should be deleted and to reassign any Reader assignments
that still exist.
l
Increased the number of events that are posted to Live Events to include cre-
dential/reader mode changes. This allows the system to maintain a more complete
history of credential and reader activity.
l
More tightly enforce the rules for disabling overrides with credential mode changes
when in the global lock and global unlock state.
l
Added value comparison between minimum and maximum Strike times. Pre-
viously the program allowed these values to be set independently, and did not
check to see if an illogical entry was made (i.e., setting a maximum Strike time to a
value less than the minimum Strike time). The program now automatically
increases the maximum time if the minimum time is set to a value greater than the
existing maximum time and decreases the minimum time if the maximum time is
set to a value less than the existing minimum time. In both cases, the maximum
and minimum times will be the same.
l
Added a value check to entries to the cardholder grid. If an invalid data value was
entered into one of the cardholder grid fields the grid display could go blank. The
program now checks and rejects invalid data entries.