Keri Systems Doors.NET Manual - Manual (Page 559)

Doors.NET Reference Manual
- 559 -
1. Click the Triggers tab, click the Add Trigger button and in the Description field cre-
ate a name for the trigger (Input - Active).
l
Execute this procedure - Select the Card and Pin Procedure
Procedure Command - Should be left at the default of: Execute (Prefix A Actions)
Source Type - Select Monitor Point (The available monitor point transactions will
appear on the right)
Source - Select the specific input that will be used
Active During This Schedule - Select Always for the linkage example to always
be actionable.
Trigger Variable Logic - Should be left at the default
Transactions - On the transactions list place a tick against the transaction: Alarm:
Input is Active
2. When you have inputted the above information your screen should look similar to
that shown below: