Keri Systems Doors.NET Manual - Manual (Page 464)

Doors.NET Reference Manual
- 464 -
Doors
If the Situation Manager is enabled, two additional properties in the Doors grid are
enabled. These two properties control whether or not each reader participates in Global
Lock or Global Unlock commands. The default is to not ignore Global Lock or Global
Unlock commands.
1. In the Hardware Setup tab, click the Doors tab.
2. Select a Door to be assigned or unassigned to Global Lock or Global Unlock func-
tions. You may need to widen the Description column to ensure you are selecting
the desired door.
3. Click/enable the Advanced View icon in the grid to view the Situation Manager
Global Lock/Unlock properties.
4. Scroll down the grid and locate the Situation Manager options.
5. Click in the Ignore Global Unlock field and select from the pull-down menu:
Yes to ignore Global Unlock commands or No to respond to Global Unlock com-
mands.
6. Click in the Ignore Global Lock field and select from the pull-down menu:
Yes to ignore Global Lock commands or No to respond to Global Lock com-
mands.
Inputs
If the Situation Manager is enabled, two additional properties in the Inputs grid are
enabled. These two properties designate an input as either a Global Lock input or a