Keri Systems Doors.NET Manual - Manual (Page 38)

Doors.NET Reference Manual
- 38 -
l
The program now requires that a new cardholder entry be saved before attaching a
photo to that cardholder. This ensures the new cardholder entry is created in the
database, providing the proper database location for the photo to be attached.
Unique to NXT Controllers:
l
Corrected an issue when in Lock-down Mode. RTE requests were being per-
formed by the system when they should not be. When in Lock-down Mode, an RTE
request should generate an event, but not be performed. Lock-down Mode now
operates correctly.
l
Corrected a status display issue with RIMs when performing a Firmware Update.
When an update network was completed, the timing for requesting updated status
was performed so quickly that some RIMs had not completely rebooted following
the firmware update. These RIMs would not display on the status screen though
they had been correctly updated and were actually operating. The system now has
a slight delay between completing the update and requesting status from the RIMs
to ensure the RIMs have enough time to reboot and come back on line. Opening
the firmware update screen for NXT controllers now requests status of the con-
trollers so the screen is up to date with the modules that are online.
l
Added the Smart Update feature for NXT controllers. When a smart update is per-
formed only newly entered changes are uploaded to the controllers.
l
Improved the tracking of updates for controllers that are offline at the time an
update is performed. Controllers are marked in the user interface as needing spe-
cific updates if they were offline when the update was performed. When these con-
trollers come back online, these updates are automatically performed. Successful
updates will clear these update markers and failed updates will reset these mark-
ers.
l
Improved the reporting of controller firmware revisions in Live Events. If a controller
failed to report its firmware revision, Live Events now reports the command failed. If
a controller reports a revision that is out of date, Live Events shows both the current
and the expected revision numbers.
l
Corrected an issue where a change to a door strike time was not received by the
controller unless the gateway was restarted.
l
Changed the door contact default value to No Door Contact (which disables the
call outs for strike minimum time and strike mode). This accommodates the major-
ity of our customers who do not use a door contact on their installations.
Unique to Keri NXT Mercury Powered Controllers (MSC):
l
Added a Special Event option to the Holiday Schedule list. This allows a one-time
special event schedule to be defined that does not affect any other existing sched-
ule.
l
Added support for the Assa Aperio AH-30 hub supporting 8 wireless locks with a
50 foot range.