Keri Systems Doors.NET Manual - Manual (Page 16)

Doors.NET Reference Manual
- 16 -
Unique to PXL Controllers:
l
Made a number of gateway improvements to accommodate network timing con-
ditions in medium to large controller networks (typically 20 controllers or more).
l
Corrected an issue with single-door applications using two readers. Operating
parameters assigned to the second reader are now properly applied to that reader.
l
Implemented a check to prevent multiple back-to-back Update Network requests
from being executed.
l
Corrected an issue where if a slave controller was reset and then comes back
online, the property grid was correctly updated, but the status grid was not until a
request status command is performed. The status grid now does a real-time update
to ensure displayed information is correct.
l
Made a number of improvements to the reporting function options.
l
Added checks to ensure Holiday schedules and associated limits are being
applied correctly.
Unique to Keri NXT Mercury Powered Controllers and Mercury Hardware:
l
Added support for a double credential presentation feature allowing a double-
presentation of a credential be a local linkage trigger.
l
Corrected an issue with temporary cards disabling themselves 1 minute late.
l
Added credential Use Count to the credential template.
l
Corrected the clock synchronization feature in the System Calendar. It was not
properly synchronizing the controllers with the host computer. Also added the abil-
ity to synchronize all controller clocks at one time.
l
Added a new Reader mode control "timed to action list" option to Local Linkages.
Allows a local linkage macro to set any Reader mode for a designated amount of
time.
l
Added support for IPv6 addressing.
Unique to ASSA Aperio Hardware:
l
Added support for new devices - Securitron R100, HES KS100, and AS100.
l
Added a Scheduled Relock command.
l
Added support for the Situation Manager feature.
l
Corrected an issue with event display filtering.
l
Added a Scheduled Relock command.
Unique to ASSA WiFi/POE Hardware:
l
Added support for remote Unlock/Lock. These lock sets must have the Always Con-
nect option enabled.
l
Added support for the Situation Manager feature.