Keri Systems Doors.NET Manual - Manual (Page 18)

Doors.NET Reference Manual
- 18 -
l
PXL controllers require firmware revision 8.6.09.
l
Legacy PXL controllers should be at firmware revision 8.4.49 or greater (this firm-
ware revision is programmed with the current U.S. Daylight Savings Time dates
and has the complete PXL implementation of Anti-Passback).
For Mercury Powered NXT controllers and Mercury Hardware:
l
Mercury Powered NXT controllers require new firmware revision 1.185.
Firmware Upgrades
NXT Firmware v2.05.40
l
Added support for updating NXT Reader firmware.
l
Implemented a number of Ethernet communication enhancements that help protect
the controller from data that does not apply to the controller, including bad data
packets and invalid connection attempts. These changes help to prevent the con-
troller from being knocked offline.
l
Added a health monitor to collect and save information on questionable Ethernet
events. This information can be used to assist in debugging Ethernet related
issues. This feature is selectively enabled, and should only be used if a controller
has repeated networking issues.
l
Corrected an error in applying holiday dates to door unlock schedules.
Mercury Hardware Firmware v1.185
l
The 4x4 status command now provides more status information.
l
Corrected the red LED display pattern when in 2-wire LED control mode.
l
Corrected a configuration issue with Schlage AD300 lock sets that could cause the
controller to reset.
l
Now actively requests Schlage Wake-on-Radio status, improving the reporting of
latch state changes.
l
Corrected Schlage lock set operation in Card OR PIN mode.
l
Added extended lock set modes: Classroom, Office, Privacy, and Apart-
ment/Canadian-Law.
l
Double card presentation is treated as a toggle state in extended lock set modes
Classroom and Office.
l
Added support for OSDP biometric types.
l
IPv6 web connections now use Zeroconf name, resolving browser incompatibilities
with IPv6 literal addresses.
l
Made changes to how Scheduled Override for Aperio operates when invoked by a
linkage trigger to accommodate the triggering condition. This prevents conflicting
operations from occurring.
l
Corrected a backwards compatibility issue with older Schlage AD-series locksets.