Altera External Memory PHY Interface - Manual (Page 11)

Chapter 2: Parameter Settings 2–5
© January 2010 Altera Corporation External Memory PHY Interface (ALTMEMPHY) (nonAFI) Megafunction User Guide
QDR II+/QDR II SRAM Preset Editor Page
Figure 2–2 shows the Preset Editor page for the ALTMEMPHY variation for
QDR II+/QDR II SRAM interfaces.
Table 2–3 through Table 2–5 describe the QDR II+/QDR II SRAM parameters
available for memory attributes, initialization options, and timing parameters.
The QDR II+ SRAM devices have the same parameters as QDR II SRAM devices, but
their value ranges can differ. Confirm that the value you have chosen is valid in the
ALTMEMPHY MegaWizard interface.
Figure 2–2. Preset Editor for QDR II+/QDR II SRAM Interfaces