Device (see, Figure 2–3 – Altera External Memory PHY Interface User Manual
Page 14
Advertising
2–8
Chapter 2: Parameter Settings
External Memory PHY Interface (ALTMEMPHY) (nonAFI) Megafunction User Guide
© January 2010
Altera Corporation
To indicate that you are interfacing with 36-bit read and 36-bit write data follow these
steps:
1. On the Memory Settings page click Modify Parameters, to open the Preset Editor,
see
.
Figure 2–3. Select a ×18 Device
Emulated Device
Actual Device
Advertising