CIRCUTOR PowerStudio Series User Manual
Page 69
PowerStudio
User Manual 69
Clicking here will bring up a dialogue that allows you to select an image
stored on the PC for later use in SCADA screens or reports. PowerStudio will create a copy of the
image and will work with the copy, at no time will PowerStudio use the original image selected.
The images that can be added should have a maximum size of 2 Mbytes and a maximum
resolution of 2048x2048 pixels. Remember that when larger images are added, the load
times from the SCADA screens or reports client, also increase.
Likewise, once images have been added to a group they can be easily copied or changed, by
left clicking on one of those selected.
Without releasing the left mouse button, drag to the destination group.
Finally, release the left mouse button for the change to take place.
If you want to copy images in another group proceed in the same manner as with the group
copy by pressing CTRL before releasing the left mouse button.
When clicked the selected image will be automatically removed.
PowerStudio will delete the copy created and will not delete the original stored on the PC.
Display the image by double clicking on it: