Adept Python - Manual (Page 153)

Adept Python Modules User’s Guide, Rev. E 153
Maintenance
11
11.1 Introduction
Table 11-1 gives a summary of the preventive maintenance procedures and guidelines on
frequency.
NOTE: The frequency of these procedures will depend on the particular
system, its operating environment, and amount of usage. Use the times in
Table 11-1 as guidelines and modify the schedule as needed.
Table 11-1. Inspection and Maintenance
Item Period Reference
Check E-Stop, enable and key switches, and barrier
interlocks 6 months See Section 11.2 .
Check mounting bolts on all modules and brackets 6 months
Clean the heat sink fins on all MB-10s 1 month
Track the usage on the encoder battery and replace when
required. varies See Section 11.4 .
Track the usage on the MB-10 internal battery and replace
when required. varies See Section 11.3 .
WARNING: The procedures and replacement of parts
mentioned in this section should be performed only by
skilled or instructed persons, as defined in
Section 2.11 on
page 33 .