Daktronics AB-1600-1.5,2.5 - Manual (Page 14)

1-8 Introduction
(VSR).
1.4 Daktronics Nomenclature
The Daktronics module numbering system assigns numbers to modules to aid in wiring and
troubleshooting. Remember, a module is two, side-by-side lens/reflector assemblies. Figure 21
illustrates the numbering on a typical 16x80 pixel small matrix display. Figure 22 explains the
meaning of the module numbering.
In addition, lampbanks also have a numbering system.
There are two lampbanks mounted on the back of each
lens/reflector assembly. Therefore, there are four
lampbanks per module. Figure 23 illustrates this
lampbank numbering. It uses the same first four digits as
the module numbering system, but with an A, B, C or D
at the end to indicate whether it is the first, second, third
or four lampbank on that module.
Figure 21: Module Numbering (16x80 Display) – Front View
Figure 22: Module Numbering Detail
Figure 23: Lampbank Numbering (16x80) - Front View