Daktronics AB-1600-1.5,2.5 - Manual (Page 41)

Electrical Installation 3-19
USE EXTREME CAUTION!
Do not short across the terminals of the voltage tester. Doing so will damage the module
electronics.
6. Repeat the above steps for at least two more modules.
7. Carefully replace the lamps and lenses.
Remember to record the lamp voltage readings on the each “Display Power Report” found in
Appendix B. Return one of the forms to Daktronics Customer Service.
Figure 40: Removing an ON Lamp Figure 41: Lamp Voltage Tester