Configuring the client pc, Setup window – OpenEye Gen6 X-Series User Manual
Page 114
32539AF
115
Configuring the Client PC
All configurations take place in the Emergency Agent window on the Client PC. For descriptions and
locations of the buttons and features of the Emergency Agent window, refer to the Emergency Agent
Window section.
1.
Open the Emergency Agent window on the
Client PC -
Start >All Programs > OpenEye >
Emergency Agent > Emergency Agent.
2.
Right-click in the DVR list and select
New
.
Enter the
DVR Code
,
DVR Name
, and
IP
Address
of the recorder.
3.
Click the
Options
menu and select
Setup
.
4.
Confirm that the
Network Port
in the
Setup
window is set to the same number as the
Emergency Port in Network Settings on the
recorder. If the numbers are different adjust the
Network Port
on the client PC to match the
recorder.
5.
Click
OK
.
6.
Restart the Client PC.
Setup Window
Network Port
Indicates the port which the Emergency Agent uses to listen for incoming events. This number should
be changed to the same number as is set in the Emergency Port in
Network Settings
on the recorder.
Save Directory
Sets the location that recorded video footage is saved to.
Notice Options
Configuration settings for activating an audible indicator or popup window when the Emergency Agent
receives an event.