OpenEye Gen6 X-Series - Manual (Page 54)

32539AF 55
Enable Sabotage Detection
The Camera Sabotage Detection feature will notify users that the field of vision of a camera has been
compromised, abruptly changed, or detects significant vibration.
To enable Sabotage Detection:
1. In the Motion Detection window, click the Sabotage
Detection tab.
2. Select Enable Sabotage Detection .
3. Set the Pixel Change threshold to reduce false
alarms.
4. To activate an alarm relay on Sabotage Detection,
click Activate Relay, and then select the appropriate
relay number.
5. Select the Beep on Detect check box to enable the
recorder to emit an audible beep on Sabotage
Detection.
6. Click Apply to save your settings.
Etc.
Additional motion detection configuration options are found on the Etc. tab. Use this tab to set a camera
channel to appear at full screen in the Display screen when a motion or sensor event is detected. You
can also set your recorder to enable motion detection even during continuous recording, or play an
audio warning when an alarm event is detected.
Set a camera channel
to be immediately
displayed full screen
Enable motion
detection during
continuous recording
Enable an audio
warning during an
alarm event