OpenEye Gen6 X-Series - Manual (Page 76)

32539AF 77
1. Set up the General and Users tabs first.
2. Click the SMART Alert tab.
3. Select Enable .
4. Define the frequency of SMART status checks (in hours).
5. Select the type of SMART event to trigger an action.
6. If selecting for temperature checks, define the maximum
HDD temperature.
Note OpenEye recommends a temperature threshold of
150° F (65° C) if you choose to use this function.
7. Select an Action Method ( Beep Alert , Popup Message
Alert , or Email Alert ).
8. Add a Comment that will be seen in the email message if
desired.
9. Click Apply to save your settings.
1. Set up the General and Users tabs first.
2. Click the Alarm Event tab.
3. Select Enable .
4. Define the frequency to send email alerts (in minutes).
5. Select the Event Type : Motion , Sensor , or No Signal
(video loss).
6. Select With Detail Info to receive a still image attachment of
the associated camera in the email message.
7. Max Count defines the number of message that will contain
detailed data within the frequency time frame.
8. Add a Comment that will be seen in the email message if
desired.
9. Click Apply to save your settings.