OpenEye Gen6 X-Series - Manual (Page 38)

32539AF 39
By default, the recorder displays live video from four IP cameras at one time on the local server. This
protects the processor resources for recording data. You can change your settings to allow 16 IP
channels to be displayed in the live view. Be aware that displaying 16 channels of live IP video is
resource-intensive and may dramatically impact system performance.
To enable the recorder to view 16 channels of live video:
1. Click Exit on the Display screen, and then select Restart in Windows Mode.
2. Double-click the Edit Live View Channels icon on the desktop.
3. Click Yes , and then click OK .
4. The live view display will switch to 16 channel mode. To return the recorder to 4 channel mode,
repeat steps 2 and 3.
5. Double-click OpenEye Serve r to restart the recorder software.
Note When viewing live video from Network Cameras, only 4CH will display at one time. If more
live view channels are required on the local server, see the Edit Live View Channels
instructions.
1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
2nd Four Cameras View – Displays cameras 5-8 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
3rd Four Cameras View – Displays cameras 9-12 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
4th Four Cameras View – Displays cameras 13-16 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
1st Nine Cameras View – Displays cameras 1-9 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
2nd Nine Cameras View – Displays cameras 10-18 in the Video Display Area. To return to a
different Multi-Camera View, select a different Screen Division option from the Screen Division
menu.
Full Screen – The Full Screen Option allows you to view the Video Display Area using the entire
viewable area on the monitor. When this is selected, no menu options are visible. You can
activate the Full Screen Option by clicking on the Full Screen button within the Screen Division
menu. You can deactivate Full Screen mode by right clicking on the screen.
Auto Sequence – Sequences through the Screen Divisions sets. For example, selecting the 1A
and then the Loop button will sequence through 1A, 2A, 3A, 4A and then repeat.