OpenEye Gen6 X-Series - Manual (Page 14)

32539AF 15
This manual is a setup and maintenance guide that can be used for reference when setting up your recorder and for
troubleshooting when a problem occurs. Only authorized personnel should attempt to repair this unit.
OpenEye reserves the right to make changes to the products represented by this manual without notice.
The following text and symbols mark special messages throughout this guide:
Text set off in this manner indicates information that is necessary for proper operation of the
product.
Text set off in this manner indicates information that may be helpful.
Only authorized technicians trained by OpenEye should attempt to repair this recorder. All
troubleshooting and repair procedures are to be used for reference and minor repair only.
Due to the complexity of the individual components and subassemblies, no one should
attempt to make repairs at the component level or to make modifications to any printed
wiring board. Improper repairs can create a safety hazard, and any indications of
component replacement or printed wiring board modifications may void any warranty.
To reduce the risk of electrical shock or damage to the equipment:

Do not disable the power grounding plug. The grounding plug is an important safety
feature.

Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.

Disconnect the power from the computer by unplugging the power cord either from
the electrical outlet or the computer.
To properly ventilate your system, you must provide at least 3 inches (7.6 cm) of clearance
at the front and back of the recorder.