OpenEye Gen6 X-Series - Manual (Page 92)

32539AF 93
Using the Index Search can greatly decrease the amount of time spent searching through saved video.
The Index Search allows you to perform a search based on criteria such as Sensor, Motion and Instant
Record events.
Performing an Index Search
1. In the Search screen, click Select Date .
2. Select a date and time, and then click OK .
3. Click Index .
4. Select the cameras and sensors to include in the
search.
5. Select the Select Time check box to define a
specific period.
6. Select an event type to search in the Select Sort
Option section (
Sensor , Motion , Instant Record ),
or select the All Event Types option.
7. Click OK . There may be a delay while results are
returned. Results will be displayed in a column on
the right side of the screen
– Each line represents a
segment of video . If no results are found, “NO
IMAGE FOUND” will appear in the column.
8. Once the results are displayed, double-click any
result to play the associated video.
9. Once your desired image is found, apply it to the
Main Search by clicking
Close at the bottom of the
results column.
Index Search Results Display
Image Display Area Time Event Occurred
Event Recorded on Camera # Event Type:
M
– Motion
S – Sensor
IR – Instant Record