OpenEye Gen6 X-Series - Manual (Page 75)

76
1. Set up the General and Users tabs first.
2. Click the Storage Check tab.
3. Select Enable .
4. Define the frequency of storage checks (in minutes).
5. Select an additional Alert Option if desired ( Beep or Popup
Message ).
6. Add a Comment that will be seen in the email message if
desired.
7. Click Apply to save your settings.
1. Set up the General and Users tabs first.
2. Click the Recording Data Check tab.
3. Select Enable .
4. Define the frequency of data checks (in hours).
5. Select the Action Method ( Popup Message Alert , Beep
Alert , or Email Alert ).
6. Add a Comment that will be seen in the email message if
desired.
7. Click Apply to save your settings.