Sequencing, Auto sequence, Create custom auto sequence – OpenEye Gen6 X-Series User Manual
Page 58
32539AF
59
Sequencing
The Sequencing tab allows you to set the parameters for viewing groups of screens in sequence in the
Live View.
Auto Sequencing is available either in the Display screen when Auto Sequencing has been enabled.
Auto Sequencing conveniently displays video channels at specified intervals and sequences through
each selected channel.
Custom Mode
–
Create non-standard screen division layouts.
Skip 0 FPS Channel
–
Sequence skips cameras with no video signal.
Each screen division can be individually customized but a camera can only be displayed once in each
group view. All selected screen divisions will be shown when AutoSequence is enabled on the Live
View. Be sure to clear any screen division you do not want to be displayed during AutoSequence
viewing.
1.
On the Display screen click
Setup
, and then click
General Setup
.
2.
Click the
Sequencing
tab.
3.
Drag and drop cameras from the
Channel List
to the desired location within the
Division Group
.
4.
Select the screen intervals you want to display in each division area.
5.
Set the
Interva
l time (in seconds). This determines how long each sequence screen will appear on
the Live display.
6.
To save your settings, click
Apply
.
Division Group
Channel
List