OpenEye Gen6 X-Series - Manual (Page 47)

48
Assigning Dual Streams
Dual stream support enables you to take advantage of two different streams from an IP camera. One
stream can be high definition forensic video, while the other stream can be a lower resolution for live
display. This allows OpenEye RADIUS or Remote Viewer software to display more cameras while
utilizing lower bandwidth and less CPU usage.
The second stream is used for motion detection in the server, which lightens the processing load for
centrally-managed motion detection configurations
Dual streaming functions are limited to cameras that support this feature.
1. On the Display screen, click Setup .
2. Click Camera Setup, and then click IP Cameras.
3. Click the Camera Setup tab.
4. Choose which camera you want to configure, and double-click the Record Stream column.
5. Select which Stream you want to assign to be recorded.
6. Double-click the Transmit Stream column and choose the appropriate stream for remote viewing.
7. Click Apply to save your selections.
Assigning Audio Channels to a Network Device
1. In the Display screen, click Setup .
2. Click IP Cameras.
3. Click the Camera Setup tab.
4. Click the Advanced Camera Setup tab.
5. Select the camera you want to record audio from in the Network Cameras Currently in Use field.
6. Select Record Network Audio .
7. To be able to hear live audio from the recorder, select Enable Network Audio in Live View .
8. Click Apply to save your settings.