ATL Telecom AM30 - Manual (Page 103)

ATL Telecom User Guide
AM30
1
0
3
Field Description
Last Fail Cause Indicates the action that ended the previous PPP session:
o
No Valid PADO Recvd: The unit initiated a PPoE
handshake but did not receive a packet in reply
from the ISP.
No Valid PADS
o Recvd: After the initial handshake,
the unit did not receive a confirmation packet from
the ISP.
Stopped
o by User: The user stopped the connection
(for example, by changing the Configuration
Manager settings for the PPP interface.)
o No Activity: The PPP communication timed out, in
accordance with the timeout period specified on
the PPP Configuration page.
Auth Failure: The ISP could no
o t authorize the
connection based on the user name and/or
password provided.
PADT Recvd: The ISP
o issued a special packet type to
terminate the PPP connection.
VC down: The Virtual Circuit be
o tween the unit and
the ISP is down.
Internal failure: A
o system software failure occurred.
DNS The IP address of the DNS server (located with your ISP)
used on this PPP connection.
SDNS The IP address of the secondary DNS server (located
with your ISP) used on this PPP connection.
Security
Protocol The type of PPP security your ISP uses: PAP (Password
Authentication Protocol) or CHAP (Challenge
Handshake Authentication Protocol).
Login Name The name you use to log in to your ISP each time this
PPP connection is established.