ATL Telecom AM30 - Manual (Page 28)

28 ATL Telecom User Guide
AM30
Part 3 — Configuring the ROUTER
In Part 3, you log into the program on the ROUTER and configure basic settings for your
Internet connection. Your ISP should provide you with the necessary information to
complete this step.
Logging In to the ROUTER Quick Configuration Page
The ROUTER provides a preinstalled software program called Configuration Manager which
enables you to configure the operation of the device via your Web browser. The settings
that you are most likely to need to change before using the device are grouped onto a
single Quick Configuration page.
Follow these instructions configure the device settings:
1. At any PC connected to the ROUTER via Ethernet or USB,
open your Web browser, and type the following URL in the
address/location box:
192.168.1.1/setup
When you press <Return>, the page shown in Figure 13
should display (see Appendix 0, “Troubleshooting,” if
you receive an error message or the page does not
display).
Figure 13. Quick Configuration Page in Configuration Manager