ATL Telecom AM30 - Manual (Page 96)

96 ATL Telecom User Guide
AM30
The ATM VC Configuration table displays the following fields (contact your ISP to determine
these settings):
Field Description
Interface The name of the lower-level interface on which this
VC operates. The low-level interface names are
preconfigured in the software and identify the type
of traffic that can be supported, such as data or
voice. Internet data services typically use an AAL5-
type interface.
Vpi, Vci, and Mux
Type These settings identify a unique ATM data path for
communication between your ADSL/Ethernet router
and your ISP.
Max Proto per
AAL5 If you are using an AAL5-type of interface, this
setting indicates the number of higher-level
interfaces that the VC can support (the higher level
interfaces can be PPP, EoA, or IPoA interfaces).
Contact your ISP to determine which connection
protocol(s) they require.
Actions
Displays icons you can click on to modify ( — see
page 98) and delete ( ) the associated interface.
You cannot delete an ATM interface if another
protocol such as PPP, EoA, or IPoA has been defined
to operate over the ATM interface. Delete the
higher-level interface first, and then delete the ATM
interface.
Adding ATM VCs
You may need to create a VC if none has been predefined on your system or if you use
multiple services with your ISP. Each service may require its own VC. Follow these
instructions to add a VC:
1. From the ATM VC Configuration page, click .
The ATM VC – Add page displays, as shown in Figure 46.
Figure 46. ATM VC – Add Page