ATL Telecom AM30 - Manual (Page 152)

152 ATL Telecom User Guide
AM30
Viewing System Alarms
You can use the Configuration Manager to view information about alarms that occur in the
system. Alarms, also called traps, are caused by a variety of system events, including
connection attempts, resets, and configuration changes.
Although you will not typically need to view this information, it may be helpful in working
with your ISP to troubleshoot problems you encounter with the device. (Despite their name,
not all alarms indicate problems in the functioning of the system.)
Viewing the Alarm Table
To display the Alarm page, log into the Configuration Manager, click the Admin tab, and
then click Alarm in the task bar. The Alarm page is shown in Figure 72.
Figure 72. Alarm Page
Each row in the table displays the time and date that an alarm occurred, the type of alarm,
and a brief statement indicating its cause.
You can click on the Refresh Rate drop-down list to select a recurring time interval after
which the page will redisplay with new data.
To remove all entries from the list, click . New entries will begin accumulating and
will display when you click .