ATL Telecom AM30 - Manual (Page 98)

98 ATL Telecom User Guide
AM30
Modifying ATM VCs
Your device may already be preconfigured with the necessary ATM VC properties, or the
table may contain placeholder values that you must change before using the device.
Contact your ISP to determine your ATM VC values. Follow these instructions to modify a
preconfigured VC:
1. From the ATM VC Configuration page, click in the
Actions column for the interface you want to modify.
The ATM VC Interface – Modify page displays, as shown
in Figure 46.
Figure 47. ATM VC Interface – Modify Page
2. Enter the new VPI and VCI values, select the MUX type, or
change the maximum number of protocols that the VC can
carry, as directed by your ISP.
You cannot modify the interface type over which an
existing VC operates (aal5-0, for example). If you want to
change the interface type, you must delete the existing
interface, create a new one, and select the desired
interface type.
3. Click .
4. On the confirmation page, click to return to the
ATM VC Configuration page.
5. Click the Admin tab, and then click Commit & Reboot in the
task bar.
6. Click to save your changes to permanent
memory.
You can verify that the new settings work by attempting to access the Internet from a
LAN/USB computer. Contact your ISP for troubleshooting assistance.