H3C Technologies H3C Intelligent Management Center - Manual (Page 77)

68
3. Configure the alarm parameters in the Alarm Threshold for All Bad Calls and Alarm Threshold for
Per-User Bad Calls areas:
• Number of Bad Calls—Enter the number of bad calls on all Lync endpoints or one Lync
endpoint. The value range is from 1 to 999999.
• Time Range (minutes)—Select an option from the Time Range list. Options are 5, 10, 15, 30,
and 60.
Figure 52 Alarm settings
4. Click OK.
UCHM will trigger an alarm message when the number of bad calls on all endpoints or one endpoint
reaches its threshold in the specified time range.