Grass Valley K2 System Guide v.9.0 - Manual (Page 214)

protocols can also use Ethernet connections.) You can connect one RS-422 cable to each channel.
Each RS-422 connection controls the channel to which it is connected only. Connect the RS-422
cabling as required, then refer to topics in "K2 AppCenter User Manual" to configure the K2 system
for remote control.
Specifications for the RS-422 connection are as follows:
• Data Terminal Equipment (DTE)
• 38.4K Baud
• 1 Start bit
• 8 Data bits
• 1 Parity bit
• 1 Stop bit
Security and protocol control
The K2 security features can be configured to restrict protocol control of channels.
Related Topics
Protocol control of channels and media access security on page 180
214 K2 System Guide 06 November 2012
Remote control protocols