Grass Valley K2 System Guide v.9.0 - Manual (Page 220)

Specification Parameter
BNC, 75 ohm, No loop-through Connector
800mV peak-to-peak terminated nominal Amplitude
0 +0.5V DC Offset
SD: 400 - 1500ps; measured at the 20% and 80% amplitude points
HD: less than 270ps
Rise and Fall Times
less than 0.2UI peak-to-peak Jitter
SD 300 meters
HD 125 meters
Max Cable Length
greater than or equal to 15db, 5Mhz to 1.485Ghz Return Loss
Genlock Reference
The K2 Summit/Solo system specification is shown in the following table:
Description Characteristic
NTSC/PAL Color Black Composite Analog Signal Type
2 BNC, 75 ohm passive loop through Connectors
Stays locked to +6 dB and -3 dB Signal Amplitude Lock Range
Greater than or equal to 36 dB to 6MHz Input Return Loss
Supported Tri-level sync
System Timing
The K2 Summit/Solo system specification is shown in the following table. All delay values shown
are relative to Black Reference.
Description Characteristic
Derived from the video input Encoder timing
Adjustable
(Default: Zero timed to reference genlock)
Nominal Playback Output Delay
525 lines
• Frames: 0 to +1
• Lines: 0 to +524
• Samples: 0 to +1715 clock samples
SD Output Delay Range
(Independent for each play
channel)
220 K2 System Guide 06 November 2012
Specifications