Grass Valley K2 System Guide v.9.0 - Manual (Page 54)

To restore custom settings:
1. If you want to save current settings, you should save them as a configuration file before continuing.
2. In the Configuration Manager, click the Load button.
The Open dialog opens.
3. Use the up arrow or select folders to navigate to the custom configuration file.
4. Select the custom configuration file.
5. Click Open .
The custom settings are loaded into Configuration Manager, but they have not been saved and
put into effect.
6. Click OK to save and apply settings, and to close the Configuration Manager.
Restoring default Configuration Manager settings
You can restore factory default settings as follows:
• Restore some individual settings or groups of settings by selecting the Default button which
appears below the settings in the configuration screen.
• Restore all the settings in Configuration Manager at once to their default values as explained in
the following procedure.
1. If you want to save current settings you should do so before proceeding.
2. In the Configuration Manager dialog, click Restore .
The default settings are loaded into Configuration Manager, but they have not yet been saved
and put into effect.
3. Click OK to save settings and close Configuration Manager.
Related Topics
Saving and restoring Configuration Manager settings on page 53
K2Config
The K2 System Configuration application (K2Config) is the primary tool for configuring systems
in the category of a K2 SAN, which include online or production K2 SANs, K2 Nearline systems,
and STRATUS Proxy Storage systems. Once the devices of the storage system are cabled and are
communicating on the control network, you can do all the configuration required to create a working
K2 SAN using the K2Config application. When you use SiteConfig for network configuration, you
can import the SiteConfig system description file into the K2Config application to get you started
with your SAN configuration.
After your K2 SAN is initially installed and configured, if you need to reconfigure the system you
should do so using SiteConfig and the K2Config application. This enforces consistent policy and
sequencing for configuration tasks, which makes the system easier to maintain and aids in
troubleshooting should a problem arise.
54 K2 System Guide 06 November 2012
Overview of K2 System Tools