Grass Valley K2 System Guide v.9.0 - Manual (Page 56)

3. The K2Config application opens.
If you have one or more K2 SANs currently configured, the K2Config application displays the
systems in the tree view.
If you have not yet configured a K2 SAN, the K2Config application opens with the tree view
blank.
Storage Utility for standalone K2 Summit/Solo system
There are two versions of Storage Utility:
• Storage Utility for the K2 SAN
• Storage Utility for stand-alone K2 systems
This manual explains Storage Utility for stand-alone K2 Summit/Solo system. Refer to the K2 SAN
Installation and Service Manual to learn about Storage Utility for the K2 SAN.
NOTE: For shared storage, run Storage Utility only via the K2Config application.
The Storage Utility is your primary access to the media file system, the media database, and the
media disks of the K2 Summit/Solo system for configuration, maintenance, and repair. It is launched
from the K2 AppCenter application.
CAUTION: Use the Storage Utility only as directed by a documented procedure or by Grass
Valley Support. If used improperly, the Storage Utility can render your K2 system inoperable
or result in the loss of all your media.
NOTE: Do not use the MegaRAID utility on a K2 system. This utility is for use by qualified Grass
Valley Service personnel only. When this utility is opened it scans the SCSI bus and interferes
with record and play operations.
56 K2 System Guide 06 November 2012
Overview of K2 System Tools